Outer margin

Add 3 mm of margin to the outside from the knife line or cutting line

Sticker sizes

Order sizes

Inner margin

When performing Thompson printing or cutting, there may be a pushover of 1 mm in the manufacturing process, so please provide a margin of 2 mm or more inside the knife line or cutting line.

Outer margin

Add 3 mm of margin to the outer part of the cutting line

Sticker sizes

Order sizes

Inner margin

In case of cutting work, there may be a pushover of 1 mm in the manufacturing process, so please leave a margin of more than 2 mm within the cutting line.

Outer margin

Add a 2-mm margin inside and outside the cutting line

Sticker sizes

Order sizes

Inner margin

Add a 2-mm margin inside and outside the cutting line

Note

1. The minimum distance between cutting line and cutting line is 5 mm.
2. The minimum distance between cutting line and knife line is 5 mm.
3. We cannot produce crosscut designs.
4. The round size of the kiss-cut triangle is 1 mm, and the round size of the kiss-cut rsquare is 3 mm. Sizes are adjustable.
To adjust the round size, please leave a memo or make a knife line before submitting.

Outer margin

Add 3 mm of margin to the outside from the knife line or cutting line

Sticker sizes

Order size

Inner margin

When performing Thompson printing, there may be a pushover of 1 mm in the manufacturing process, so please provide a margin of 2 mm or more inside the knife line.

Outer margin

Add 3 mm of margin to the outside from the knife line or cutting line

Sticker sizes

Order size

Inner margin

When performing Thompson printing or cutting, there may be a pushover of 1 mm in the manufacturing process, so please provide a margin of 2 mm or more inside the knife line or cutting line.

Note

1.Outdoor stickers can be printed with 3 colors of spot colors.
   To print more than 3 colors, please contact our customer service center.
2. Please specify the spot color with the pantone color number.
3. Image data cannot be printed.
4. The round size of the kiss-cut triangle is 1 mm, and the round size of the kiss-cut square is 3 mm. Sizes are adjustable.
To adjust the round size, please leave a memo or make a knife line before submitting.

Caution

1. Sharp and bumpy surfaces on sticker edges are not suitable for attaching.
2. Set a line thickness of more than 0.05 mm.
In the design, connect the blank area with the connecting line. The connecting line's thickness shoud be more than 0.035 mm.
3. Image data cannot be printed.

Outer margin

Add 3 mm of margin to the outside of the knife line

Sticker sizes

Order size

Inner margin

When performing Thompson printing, there may be a pushover of 1 mm in the manufacturing process, so please provide a margin of 2 mm or more inside the knife line or cutting line.

The line thickness is at least 5 mm.

Please refer to the guide before designing the artwork.

Production may be difficult depending on certain sizes and shapes.
Such examples include line thickness, space between lines, complex curves, and round sizes.
We can produce stickers, but we cannot increase the epoxy.
Be sure to refer to the guide on epoxy sticker manufacturing to meet the production requirements.